451-050 and the 451-053 are only rivaled by the 340-020 mantle unit for quantity produced. A Hermle 451 Series clock movement will work for 25 - 30 years night and day with out much complaint. Hermle 340 020 Manual. Hermle clock movements often have the name of the clock case maker stamped onto the brass plate of the. 340-020; 140-070; 451-030 66cm; 341-020 45cm; 1151-050. Instructions for Hermle Mantel Clocks with Mechanical 4/4 Westminster Chime W0340 or 4/4 Triple Chime Movement W1050 1) Unpack the clock Take clock.
This Rebuild Service Is For The Hermle 340-020 Westminster Chime Movement.
Hermle 340 020 Manual
Please Note: This Is A Clock Repair Service For You To Send Me Your Clock Movement To Be Rebuilt And Then Returned To You.
Invalid serialized file header unity. Axara audio converter 3.3.2 serial. Please Check My -Frequently Asked Questions- Page Or Contact Me With Any Questions You May Have.
Hermle Movements Include; 340-020, 340-021.
Seth Thomas Movements (Made By Hermle); 208-013, 401-003, 401-004, 401-005, 450-009, 497-212.
Don't See Your Clock Movement Listed?
Send me a picture of your clock movement. I will either send you a quote or direct you to the correct rebuild service for your clock movement.
The Listed Price Of $195.00 Includes The Following:
Any bushings the clock movement needs.
This clock movement will receive at least 20+ bushings.
Cleaning and oiling the clock movement.
Cleaning and oiling the springs.
Regulating the clock movement to keep good time.
Three year warranty on bushings and labor.
Return shipping is included in the price.
Seth Thomas Movements (Made By Hermle); 208-013, 401-003, 401-004, 401-005, 450-009, 497-212.
Don't See Your Clock Movement Listed?
Send me a picture of your clock movement. I will either send you a quote or direct you to the correct rebuild service for your clock movement.
The Listed Price Of $195.00 Includes The Following:
Any bushings the clock movement needs.
This clock movement will receive at least 20+ bushings.
Cleaning and oiling the clock movement.
Cleaning and oiling the springs.
Regulating the clock movement to keep good time.
Three year warranty on bushings and labor.
Return shipping is included in the price.
Payment Options Include; Credit Cards, Paypal, Or Check. (Please Make Check Payable To -Brian Scobee-)
Other Possible Repair Issues Not Included In The Price:
Damaged Or Broken Parts Such As; Teeth, Pinions, Pivots, Springs, etc. Damaged Balance Wheel Assembly. Excessively Rusty Or Tarnished Parts. Any Parts That Are Missing.
When I Receive Your Clock Movement:
I will inspect it for any extra repair issues such as those listed above. If any of these issues are found, I will contact you with an explanation and a price adjustment before proceeding with the rebuild. If you find that the price adjustment is not agreeable, I will return your clock movement to you and issue you a refund, minus the cost of return shipping.
My Average Turn Around Time Is Around 60-90 Days Or So From The Day I Receive Your Clock Movement.
Packing Instructions:
Please follow the packing instructions to ensure that your clock movement arrives safely and undamaged. Please wrap your clock movement with several layers of bubble wrap. Place your clock movement in a box that is large enough so that it is completely surrounded with tightly packed packing peanuts.
Please contact me if you require assistance removing or reinstalling your clock movement from its case. We can arrange a time to discuss it over the phone.
Please be sure to include the hands with the movement.
How The Clock Movement Wears.
This Hermle Clock Movement is made up of two brass plates with 3 springs and 15 gears between them. Each gear shaft has two pivots at either end that ride in a hole in each of the plates. As the mechanism runs, the pressure from the spring turns the first gear in one direction, that gear turns the next gear in the opposite direction, and so on. Which ever direction the pressure presses the gear to run, the pivot holes in the plates will wear in that direction. The more the holes wear, the more the gears drag as they move out of alignment, and the more power the movement needs to continue running. Eventually the movement wears to the point that the spring cannot supply enough power to run the clock. At this point the movement will need to be rebuilt.
How The Clock Movement Is Rebuilt:
First, the clock movement is completely disassembled and ran through the cleaner. Next, all the worn pivot holes are realigned and then drilled out to the proper size of the bushing it is to receive. The bushings are then pressed into the holes and touched up with a bushing reamer, as needed, to provide adequate clearance for the pivots. (I use only high quality KWM bronze bushings) The springs are stretched while being scrubbed clean, and new spring oil applied. The movement is then oiled, reassembled, and thoroughly tested.
Other Possible Repair Issues Not Included In The Price:
Damaged Or Broken Parts Such As; Teeth, Pinions, Pivots, Springs, etc. Damaged Balance Wheel Assembly. Excessively Rusty Or Tarnished Parts. Any Parts That Are Missing.
When I Receive Your Clock Movement:
I will inspect it for any extra repair issues such as those listed above. If any of these issues are found, I will contact you with an explanation and a price adjustment before proceeding with the rebuild. If you find that the price adjustment is not agreeable, I will return your clock movement to you and issue you a refund, minus the cost of return shipping.
My Average Turn Around Time Is Around 60-90 Days Or So From The Day I Receive Your Clock Movement.
Packing Instructions:
Please follow the packing instructions to ensure that your clock movement arrives safely and undamaged. Please wrap your clock movement with several layers of bubble wrap. Place your clock movement in a box that is large enough so that it is completely surrounded with tightly packed packing peanuts.
Please contact me if you require assistance removing or reinstalling your clock movement from its case. We can arrange a time to discuss it over the phone.
Please be sure to include the hands with the movement.
How The Clock Movement Wears.
This Hermle Clock Movement is made up of two brass plates with 3 springs and 15 gears between them. Each gear shaft has two pivots at either end that ride in a hole in each of the plates. As the mechanism runs, the pressure from the spring turns the first gear in one direction, that gear turns the next gear in the opposite direction, and so on. Which ever direction the pressure presses the gear to run, the pivot holes in the plates will wear in that direction. The more the holes wear, the more the gears drag as they move out of alignment, and the more power the movement needs to continue running. Eventually the movement wears to the point that the spring cannot supply enough power to run the clock. At this point the movement will need to be rebuilt.
How The Clock Movement Is Rebuilt:
First, the clock movement is completely disassembled and ran through the cleaner. Next, all the worn pivot holes are realigned and then drilled out to the proper size of the bushing it is to receive. The bushings are then pressed into the holes and touched up with a bushing reamer, as needed, to provide adequate clearance for the pivots. (I use only high quality KWM bronze bushings) The springs are stretched while being scrubbed clean, and new spring oil applied. The movement is then oiled, reassembled, and thoroughly tested.
Hermle 340 020 Movement
|
![Hermle 340 020 parts list Hermle 340 020 parts list](https://i.pinimg.com/originals/44/3d/48/443d48f3d3c10a9a98b25f11d18d50bf.jpg)
![Hermle Hermle](https://i.ytimg.com/vi/iJpzVJ5jn0E/maxresdefault.jpg)
Hermle 340-020 Service Manual
Home Grandfather ClocksWall Clocks Mantel Clocks Antique Clocks Atomic ClocksClock Owners Manuals
Clock BrandsClock RepairClock Service LocationsClock Parts Clock NewsClock Reviews Intel atom d410 motherboard drivers for mac.
Your selection should be based on:
Types of new Mantel clocks Keywound Mantel clocks come in a variety of styles and features. The better keywound Mantel clocks offer a movement made in Germany with a case made in Germany, the United States or Asia. German cases are usually much more expensive and very modern in design. If you are pleased with the style, make sure the movement is made in Germany. These clocks will last a lifetime if they are maintained properly by oiling (by a professional) and make a family heirloom that may be passed on from generation to generation. These clocks are mechanical and need to be wound with a key on a defined basis. This is usually once a week. Quartz Mantel Clocks (battery operated Mantel clocks) These clocks have come a long way recently because of advancements in technology. Quartz Mantel clocks are very affordable and keep good better time than a keywound. The chime sounds produced from a quartz Mantel clock are very good on many models, but different from the keywound Mantel clock as it is an acoustically produced tone as opposed to an electronic. These Mantel clocks will have swinging pendulums, chime volume controls and usually a night time shutoff feature. There is a new quartz movement found in some models of quartz Mantel clocks called a harmonic movement that is outstanding. |
Hermle 340 020 Manual
Grandfather Clocks 123 - © - All Rights Reserved. |